Site Standards

Parking, Driveways, and Walkways

Garages for at least two (2) cars are required along with a recommended two (2) uncovered spaces for parking. No on-street, overnight parking is allowed. Curved or offset driveways which prevent a direct view into the garage are preferable (see illustrations).

No curb side parking areas may be created by extending any portion of the street pavement.

All driveways will be concrete, asphalt, brick, stone, interlocking, concrete pavers or other paver material as approved. All colors and materials are to be submitted to and approved by the NCC.

Driveway aprons shall be a minimum of 30’ from the face of the garage door.

All driveways and walks must be dimensioned and detailed on the site plan. Dimensioning must include all radii points. All curved drives must be constructed of true arcs. Short tangents or excessively curved driveways are not permitted.

Where possible, access to corner lots shall be from the least traveled street.

All driveway cuts shall be in conformance with local standards and approved by the NCC.

Every driveway shall provide positive drainage away from the house and garage.

Front walks shall be minimum width of four feet (4’) with five feet (5’) preferred. The use of special paving material such as brick, concrete pavers or stone is recommended. Entry walkways surface materials should be the same or compatible with the driveway or structure materials.